Filter
Top Products
Repair
44 309298J
Barrel Removal
1. Prepare the gun for service, page 35.
2. Remove the air cap, page 37. Remove the gun
shroud (2).
3. Disconnect the fluid tube nut (C).
4. Remove the jam nut (28) and actuator arm (29). See
page 42.
5. Loosen the three screws (10, 33). See F
IG. 33..
6. Hold the gun body (32) with one hand and pull the
barrel (6) straight off the body. See F
IG. 33..
Fig. 33. Barrel Removal
Fig. 34. Disconnect Fluid Tube
CAUTION
To avoid damaging the power supply (12), pull the
gun barrel (6) straight away from the gun body (32). If
necessary, gently move the gun barrel from side to
side to free it from the gun body.
TI1728A
10
32
6
33
C
TI1732A
28
29
30
19
32
6
C