Filter
Top Products
-22-
G0459 12" Drum Sander
Table Lift Screws: These should be lubricated
with lithium grease every six months.
Clean the table lift screws (Figure
21) and rub
lithium grease onto the threads. Move the table
up or down to spread the grease thoroughly over
the threads.
Failure to routinely inspect your drum sander
for damage and wear could result in unsatis
-
factory work results, premature component
or machinery failure, or operator injury. We
recommend you create a checklist for routine
inspection and maintenance. Remember to
always disconnect the drum sander from its
power source before attempting to inspect,
adjust, or repair this machine!
Figure 21. Table lift screws.