Filter
Top Products
-7- G1015 Knife Belt Sander/Buffer
SECTION 3: INTRODUCTION
We are proud to offer the Grizzly Model G1015
Knife Belt Sander/Buffer. The Model G1015 is
part of a growing Grizzly family of fine wood-
working and metalworking machinery. When
used according to the guidelines set forth in this
manual, you can expect years of trouble-free,
enjoyable operation and proof of Grizzly’s com-
mitment to customer satisfaction.
The Model G1015 combines a 2" x 72" belt with
a universal
5
⁄8" arbor which can accommodate a
number of accessories including buffing wheels,
drum sanders, or flap sanders (not included).
The 2" wide belt enables you to sand small or
finely-detailed pieces, or sharpen knives and tool
blades as described later in this manual. The
G1015 comes complete with motor and electrical
package.
A number of sanding drums and belts for the
Model G1015 are available through the Grizzly
catalog.
We are also pleased to provide this manual with
the Model G1015. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our effort to produce the best documenta-
tion possible. If you have any comments regard-
ing this manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone: (570) 326-3806
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G1015 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep
it for reference.
To operate this, or any power tool, safely
and efficiently, it is essential to become as
familiar with its characteristics as possible.
The time you invest before you begin to use
your Model G1015 will be time well spent.
DO NOT operate this machine until you are
completely familiar with the contents of this
manual. Make sure you read and under-
stand all of the safety procedures. If you do
not understand something, DO NOT operate
the machine.
Commentary