Filter
Top Products
G1015 Knife Belt Sander/Buffer -8-
Unpacking
This Knife Belt Sander/Buffer is shipped from the
manufacturer in two carefully packed cartons. If
you discover the machine is damaged after
you’ve signed for delivery, and the truck and dri-
ver are gone, you will need to file a freight claim
with the carrier. Save the containers and all pack-
ing materials for possible inspection by the carri-
er or its agent. Without the packing materials, fil-
ing a freight claim can be difficult. If you need
assistance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
Parts Inventory
Figure 2 displays all of the parts you should have
after you unpack the boxes. You should have the
following items:
• Motor Unit
• Hex Nut, Right Hand Thread
• Shoulder Nut, Left Hand Thread
• Wheel Flanges (2) -
3
⁄4'' ID
• Wheel Flanges (2) -
5
⁄8'' ID
• Round Spacer
• Mounting Bracket, Sanding Arm
• Pivot Arm Bracket, w/ Large Bushing
• Lower Pivot Arm
• Upper Sanding Arm Assembly
• Drive Wheel
• Sanding Belt Shoe
• Shoe Mounting Bracket
• Tool Rest Mounting Bracket Assembly
• Tool Rest
• Sanding Belt 100 Grit
The hardware needed to assemble this machine
has generally been fastened to the component
part. A complete listing of hardware and all detail
parts is included in the parts lists and diagrams
located at the back of this manual.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Figure 2. Overview of parts.