Filter
Top Products
-10- G5959Z 12" Left-Tilting Table Saw
We are proud to offer the Grizzly Model G5959Z
Left-Tilt 12" Table Saw. The Model G5959Z is
part of a growing Grizzly family of fine woodwork-
ing machinery. When used according to the
guidelines set forth in this manual, you can expect
years of trouble-free, enjoyable operation and
proof of Grizzly’s commitment to customer satis-
faction.
The Model G5959Z is an industrial grade table
saw intended for professional use. Features
include cast iron trunnions, 4" dust port, triple V-
belt drive, dual arbor (
5
⁄8" and 1"), cam lever fence,
magnetic switch, and a 5 HP, 220V, single-phase
motor.
All running parts operate on shielded ball bear-
ings and require no maintenance for the life of the
bearings. We also offer many accessories for the
table saws including blades, outfeed rollers, a
sliding table and a mobile base. Please refer to
our current catalog for prices and ordering infor-
mation.
We are also pleased to provide this manual with
the Model G5959Z. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our effort to produce the best documenta-
tion possible. If you have any comments regard-
ing this manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Commentary
Most importantly, we stand behind our machines.
If you have any service questions or parts
requests, please call or write us at the location
listed below:
Grizzly Industrial, Inc.
1203 Lycoming Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G5959Z as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep it
for reference.
Read the manual before
assembly and opera-
tion. Become familiar
with the machine and
it’s operation before
beginning any work.
Serious personal injury
may result if safety or
operational information
is not understood or fol-
lowed.
SECTION 3: INTRODUCTION