Filter
Top Products
G9729 Combination Lathe/Mill
-19-
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous
personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: LATHE OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
O
MMEND that you read books, trade maga-
z
ines, or get formal training before begin-
n
ing any projects. Regardless of the con-
t
ent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
It is vital that you become familiar with the control
panel before operating the Model G9729.
Power
to the two motors is controlled through a
series of switches mounted on the Lower and
Upper Belt Guards in Figure 9. Please
examine
the layout before running the lathe/mill.
Note—The lathe spindle and drill spindle cannot
be
used simultaneously.
Figure 9. Control panel components.
Control Panel
1. MILL REVERSING SWITCH: select direction
of rotation for the milling/drilling spindle.
2. POWER
INDICATOR LIGHT: shines when
the system power is ON.
3. SYSTEM
ON BUTTON: push this button to
get power to the system.
4. EMERGENCY
STOP BUTTON: immediately
disconnects power to the system. Once
pressed, this button must be twisted to allow
use of the system ON button.
5. LATHE
REVERSING SWITCH: selects direc-
tion
of rotation for the lathe spindle.
2
1
3
4
5