Filter
Top Products
-50-
G9729 Combination Lathe/Mill
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
a
l injury.
Cleaning
SECTION 7: MAINTENANCE
!
Protect the unpainted cast iron surfaces on the
table by wiping the table clean after every use.
Keep tables rust-free with regular applications of
products like, G96
®
Gun Treatment, SLIPIT
®
, or
Boeshield
®
T-9 (see ACCESSORIES section on
Page 48 for more details).
Unpainted Cast Iron
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
•
Loose mounting bolts.
• Damaged
tool bits and end mills.
• Worn
or damaged wires.
• Any
other unsafe condition.
• Lubrication.
Monthly Check:
• V-belt tension, damage, or wear.
•
Clean/vacuum dust buildup from inside cabi-
net
and off motor.
Schedule
Make sure to unplug the lathe/mill before clean-
ing it. Clean your machine every day or more
often as needed. Remove chips as they accumu-
late.
Chips left on the machine soaked with water
based coolant will eventually invite oxidation
and gummy residue to build up around moving
parts. Cleaning will help keep your lathe running
smoothly. Always be safe and responsible with
the use and disposal of cleaning products.