Filter
Top Products
G9729 Combination Lathe/Mill
-49-
Figure 64. Four-Jaw, Plain Back Independent
Chuck.
G9864—3" 4-Jaw, Plain Back Chuck
G9865—6" 4-Jaw,
Plain Back Chuck
Each jaw is adjusted independently. These
chucks are used for holding odd shaped pieces
or where zero tolerance is required. These
chucks have semi-steel bodies and hardened
reversible jaws. Requires a mounting plate.
Figure 65. Live center.
G5685—MT #1 Live Center
G5686—MT #2 Live Center
G5687—MT #3 Live Center
G5688—MT #4 Live Center
Perfect for just about any turning requirement,
these dust, chip, and oil proof live centers feature
60° included angle and preloaded taper bearings.
Choose from MT #1 through MT #4.
Figure 66. Test Indicator.
G9610—Test Indicator
.03" Range/.001" Resolution
G9611—Test Indicator
.008" Range/.0001" Resolution
G9612—Test Indicator
.030" Range/.0005" Resolution
These test indicators have an easy to read dial
and a pivoting stylus that moves at right angles
to the dial face.
Figure 67. Dial Indicator.
G3632—Dial Indicator 0-
1
⁄2"
G1479—Dial Indicator 0-1"
Precision Dial Indicators are designed for use
with magnetic bases. Great for measuring run
out on lathes, blades, etc. to 0.001 resolution.