Filter
Top Products
-4-
Model T10687 (Mfg. Since 10/12)
A. Primary Handle: Used to steady the saw
when plunging and to advance its position on
the workpiece/rail track.
B. Secondary Handle: Used to lower saw blade
into workpiece once the plunge release and
ON/OFF trigger have been pulled.
C. Depth Stop & Lock Knob: Sets the maxi-
mum depth at which the saw blade will enter
the workpiece.
D. Bevel Gauge & Lock Knob (Front & Rear):
Sets the angle (up to 45°) at which the saw
blade will cut into the workpiece and locks it
into place.
E. Rail Adjustment Knobs: Allows for adjust-
ment of play in how saw slides along guide
rail track to ensure accurate cuts.
F. Zero-Stop Set Screw: Fine-tunes the zero-
stop point for calibrating the bevel gauge.
G. ON/OFF Trigger: Starts/stops the saw blade
rotation and motor.
H. Plunge Release: Allows saw blade to pivot
down and plunge into workpiece.
Features and Controls
H
G
F
D
C
B
A
E
E
D