Filter
Top Products
Model T10687 (Mfg. Since 10/12)
-5-
I. Dust Collection Port: 1
1
⁄2" port for con-
nection to a dust collection system or shop
vacuum (not included).
J. Arbor Bolt: Holds saw blade in place on the
20mm arbor. Remove it to change blades.
K. Spring-Loaded Riving Knife: Lowers into
kerf behind blade to reduce risk of binding or
pinching that causes kickback. Spring-loaded
operation allows riving knife to work with
plunge cuts. Also provides limited protection
against accidental blade contact if kickback
occurs.
L. Saw Blade: This saw is designed for a blade
that has a 160mm diameter, a 20mm arbor,
and is 2.2mm thick. A 48-tooth, carbide-
tipped blade is included.
M. Base Plate: Can be attached to the accom-
panying rail track or placed directly on the
workpiece if track is not used.
N. Blade Lock: Prevents the blade from rotating
when changing blades.
O. Cutting Indicator Arrows: Three embossed
indicator arrows, indicating maximum blade
reach for the front and rear, as well as the
center point of the blade.
I
J
L
K
M
N
O