HP (Hewlett-Packard) HP E4419B Saw User Manual


 
HP4402.book : chapter2.fm 67 Fri Feb 12 15:32:45 1999
Power Meter Operation
Saving and Recalling Power Meter Configurations
HP E4419B User’s Guide 2-67
Saving and Recalling Power Meter Configurations
To reduce repeated setup sequences, up to ten power meter configurations
can be stored in the power meter’s non-volatile memory. The HP-IB
address, the data stored in the sensor calibration tables and the zeroing
and calibration data are not stored by a preset. The calibration table
selected is not affected.
Power meter configurations are saved and recalled with the
hardkey.
To save the current measurement setup:
1. Press .
2. Use the and hardkeys to scroll through the displayed
files. When the required file is highlighted press .
3. Press .
If you require to modify the name of a file:
1. Press .
2. Use the and hardkeys to scroll through the displayed
files. When the required file is highlighted press . The
power meter displays the file name in a pop up window. Modify
this name (see below) until the desired name is displayed.
Use or to modify the character on which the cursor
is currently positioned.
Use or to move to other characters.
Use and as required.
3. To confirm your choice press .
To recall a measurement setup:
1. Press .
2. Use the and hardkeys to scroll through the displayed
files. When the required file is highlighted press .
3. Press .
Save
Recall
Save
Recall
Save
Confirm
Save
Recall
Edit Name
Insert Char Delete Char
Enter
Save
Recall
Recall
Confirm