Filter
Top Products
HP4402.book : chapter2.fm 57 Fri Feb 12 15:32:45 1999
Power Meter Operation
Selecting a Digital or Analog Display
HP E4419B User’s Guide 2-57
shown in front of or . Pressing or after the correct
multiplier has been selected confirms the entry.
To select both an analog and digital display press until two windows
are displayed. Select the format of one window to analog and the other to
digital as previously described.
To indicate if the measurement reading is outwith the minimum or
maximum values set for the analog meter, a warning message is
displayed. The analog meter also displays a digital reading. This digital
reading allows you to easily set the appropriate minimum and maximum
values for the analog display.
Note The analog display does not indicate as much measurement data
as the digital display. That is, it does not indicate when duty cycle,
range hold, offset or relative mode are enabled. In addition, it does
not indicate if the measurement is within the test limits if any are
set.
% W % W