Kohler 8/10/12RESV Welding System User Manual


 
TP-6880 10/14 51Section 3 RDC2 Controller Operation
3.21 Event Log
The event log displays up to 1000 controller faults and
notices, starting with the most recent event. Events are
numbered 1--1000, with 1 being the most recent. Each
event is displayed with the date and time of the event,
the number of the event, a code to indicate whether the
event was a warning (W), shutdown (S), or
informational notice (I), the engine hours at the time of
the event, and the event description.
The time and date for notices (I) are not stored in the
controller.
Procedure to View Event History
1. Press Select to enter the main menu.
2. Pressthe downarrow tostep downto theevent log.
3. Press Select to display the most recent event.
4. Press the down arrow to step to the next event.
5. Use the up anddown arrow buttons to viewevents.
6. Press the Select button to exit the event log.
To stop viewing the event history before the last event,
press the select button to return to the main menu.
tp6810
Event Log ---->
Date MO/DA/YEAR
time HR:MN
event number, W/S/I, engine hours
event name
Press UP and Down arrow
buttons to scroll through events
Date MO/DA/YEAR
time HR:MN
event number, W/S/I, engine hours
event name
Press Select button at any time to
return to the main menu.
Figure 3-26 Event Log