Filter
Top Products
P 14/20
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-6 Magazine Section
Fig. 26
Fig. 27
1) Separate Magazine section from Housing as described in Fig. 26.
2) The Magazine section can be disassembled as described in Fig. 27.
Flat washer 5
Magazine section can be separated from Housing by removing
M5x28 Hex socket head bolt, Flat washer 5, M5 Hex nut and Hook.
M5 Hex nut
Hook
M5x28 Hex socket head bolt
Magazine section
Pin 5
Stop ring E5
Stop ring E5 is the stopper for Pin 5 (hinge pin).
Therefore, by removing this Stop ring using slotted screwdriver
from the rear of Magazine complete, Pin 5 can be removed from
Magazine complete, and consequently, Magazine cap complete
is separated from Magazine complete.
Magazine cap complete
Magazine complete
DISASSEMBLING
Stop ring E5