Filter
Top Products
P 2/20
Repair
[1] NECESSARY REPAIRING TOOLS
[2] LUBRICATIONS
Fig. 1
Code No. Description Use for
1R003 Retaining ring S pliers ST-2N Removing Pipe 13
1R027 Bearing setting pipe 18-10.2 Assembling Rotor
1R045 Gear extractor (large)
1R346 Center attachment for 1R045
Disassembling Rotor
1R229 1/4” Hex. shank bit for M5 Screwing/unscrewing M5 Hex socket head bolt
1R266 Spring pin extractor 2 Disassembling Adjuster complete and Adjuster shaft
1R273 Ring spring 26 setting tool B Assembling Air Motor section
1R291 Retaining ring S & R pliers Disassembling/assembling Retaining ring R-24 from/to Feed piston
1R267 Spring pin extractor 2.5
Disassembling Trigger and Idler
1R268 Spring pin extractor 3
Item No.
Apply ISOFLEX NB52 to the portions designated with the white arrow, and apply lubricant VG32 to the portions
designated with black arrow, to protect parts and product from unusual abrasion.
Description Portion to lubricate
CAUTION: Disconnect the air hose from the machine and then remove remaining screws for
safety before repair/ maintenance in accordance with the instruction manual!
Trigger valve section
Inlet section
Drive section
Nail drive section
Trigger valve section
Inlet section Plug, Inlet cap, etc.
Nail feed piston section Cup washer, O rings, etc.
O rings, Trigger valve case, Trigger stem, Pilot valve, etc.
Cylinder, O rings, Driver bit set, etc.
Air Motor (Apply lubricant “VG32” to the Drum portion of Air motor.)
Air motor
Nail feed piston section