Filter
Top Products
PRODUCT
P 1/ 20
T
ECHNICAL INFORMATION
Model No.
Description
CONCEPT AND MAIN APPLICATIONS
HM1214C
Demolition Hammer
Model HM1214C is a 10kg-class demolition hammer adapted for
SDS-MAX bits.
The main features are as follows:
AVT (Active dynamic vibration absorber)
for reduced vibration during chipping
Suppression of motor speed during no-load
for reduced vibration when idling
In-line tool design optimum for downward vertical applications
High work efficiency
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
700 (27-1/2)
129 (5-1/8)
265 (10-3/8)
Specification
Standard equipment
Optional accessories
Note: The standard equipment for the tool shown above may vary by country.
Continuous Rating (W)
Voltage (V) Cycle (Hz)
Input Output
Max. Output (W)
110
120
220
230
240
15
14
7.8
7.8
7.8
50/60
50/60
50/60
50/60
50/60
1,510
---
1,510
1,510
1,510
700
700
750
750
750
1,600
1,600
1,800
1,800
1,800
Current (A)
Europe, Korea, Cyprus: 4.0 (13.1)
Brazil: 2.0 (6.6)
Other countries: 5.0 (16.4)
Double insulation
Power supply cord: m (ft)
Yes
11.7 (25.8)
12.3 (27.1)
Net weight: kg (lbs)
Impacts per min: min-1=ipm
Shank diameter: mm (")
950 - 1,900
Electronic
control
Variable speed control by dial
Constant speed control
Soft start
Yes
Yes
Yes
Suppression of motor speed
during no-load
Yes
No
18 (11/16)
Shank type Adapted for SDS-MAX bits
Weight according to
EPTA-Procedure 01/2003: kg (lbs)
Bull points
Cold chisels
Scaling chisels
Scaling chisel (for Tile)
Grooving chisel
Clay spade
Bushing tool
Rammer
Grease vessel (containing 30g hammer grease)
Plastic carrying case
Safety goggles
Hammer service kit
Side handle (D-shaped) ........... 1
Bit grease .................................. 1
Bull point .................................. 1
Plastic carrying ........................ 1
Cleaning cloth .......................... 1
Vibration
absorption
AVT (Active dynamic
vibration absorber)
Vibration absorbing handle
Yes