Filter
Top Products
Brim side
Brim of Brush
Holder Unit
Wiring diagram
wiring on Controller Cover
P 20/ 20
Do not protrude Terminals from the edge
of Controller cover when connecting them
to Switch.
Controller
Cover
Sponge
Pay attention not to pinch the Lead wires
with the edge of Controller or Controller
cover (designated with hatching).
Put Controller’s Lead wires for
connecting to Switch into the slit of
Sponge.
Switch
Terminal
approx. 30mm
Cut the Power supply cord as
illustrated below.
Fig. D-2
Fig. D-3
Correct Wrong
Correct
Wiring of Carbon Brush’s Pig Tail
Wrong
Pig tail’s Root on the brim side of Spiral spring
does not pinch Pig tail by mistake when assembling.
Pig Tail’s Root on the Rear cover side
Spiral spring easily pinches Pig tail by
mistake when assembling.
Brim of Brush
holder unit
Rear Cover Side
Brim side
Rear Cover Side
Spiral Spring, correctly
pressing Carbon Brush
Spiral spring,
pinching Pig tail
Pig Tails
Root
Pig Tail
Pig Tail’s
Root
Carbon
Brush
Carbon
Brush
Pig Tail