Filter
Top Products
P 18/ 20
Repair
[4] MAINTENANCE PROGRAM
20
22
Flat washer 39
Flat washer 30
Chuck cover
Ring spring 26
Tool holder
Impact bolt
Cylinder 40
1
24
25
26
29
Shoulder
sleeve
32
Striker
Piston
45
47
When replacing carbon brush, it is recommended to replace the following parts at the same time for longer service life
of the machine. Refer to Fig. 39.
Removing old grease, apply the new grease to the portions in Figs. 1A to 1D of the clause of [2] LUBRICATIONS.
Fig. 39
Item No. Item No.Descriptions Descriptions
1
20
22
24
25
Tool Holder Cap
Rubber Ring 39
O Ring 35.5 on Tool holder
X Ring 21 on Impact bolt
Fluoride Ring 28 on Impact bolt
26
29
32
45
47
O Ring 23 on Impact bolt
Rubber Ring 24
O Ring 31.5 on Striker
O Ring 31.5 on Piston
O Ring 35 on Piston