Miller Electric 500DX R Welding System User Manual


 
OM-129 647 Page 28
7-2. Maintenance Label
DEUTZ F3L912 DIESEL ENGINE
Check
Recommended Oil API Service Classification CD/CE (or better). . .
Oil Change & Filter dirty conditions 100 hours or less. . . . . . . . . . . .
normal conditions 125-150 hours. . . . . . .
Oil Filter MILLER 064 677, Deutz 117-4418, Fram PH6923. . . . . . . . . . . .
Oil Capacity 8.5 qt (8 L) or 9 qt (8.5 L) with filter change. . . . . . . .
+
S-181 642-B
Spark Arrestor Inspection And Service 250 operating hours . . . . . . . . . .
see Owner’s Manual
Fuel Capacity 23 gal (87 L). . . . . . .
Fuel Grade 1-D or 2-D Cetane No. 45 min.. . . . . . . . .
Secondary
Fuel Filter MILLER 064 686, Deutz 117-4423, Fram P4102. . . . . . . . . .
Primary Fuel Filter/
Water Separator MILLER 062 342, Fram P1107. . . . .
Fill filter with clean fuel before installing read instructions on filter.
Engine RPM No Load
Weld 1850. . . . . . . . . . . .
Air Filter Service 50 hours or less see Owner’s Manual. . . . .
Air Filter Element MILLER 020 319, Donaldson P181052,. . . .
Fram CAK 253
Alternator Belt Gates 7425, Deutz 02235179. . . . . . .
Blower Belt MILLER 064 690, Deutz 223-5531, Gates N7500. . . . . . . . .
Avoid recirculation of air from hot air exit to blower intake.
Have only trained technician maintain injection pump and injectors. AIR,
WATER, or GASOLINE will harm the injection system. If engine has run
out of fuel or fuel filter is changed, bleeding of air may be required.
Check engine manual for proper procedure.
Diesel
See Engine Manual for complete engine care.
Give Engine Specification and Serial Number when ordering parts.
daily.
Battery BCI Group 31. . . . . . . . . . . . .
Cranking Performance at 0°F (-18°C) 800 Amps. . . . .
Valve Clearance Cold
Intake 0.006 in (0.15 mm). . .
Exhaust 0.006 in (0.15 mm).
Injectors should be checked annually.
30 °C
20
10
0
10
20
30
40
°F 86
77
68
59
50
41
32
23
14
5
4
13
22
31
40
5W/30 (Synthetic)
10W/30
40
10W/40
15W/30
15W/40
30
20W/20
10W
**
*Only with engine
oil preheating