Miller Electric 500DX R Welding System User Manual


 
OM-129 647 Page 29
7-3. Servicing Air Cleaner
aircleaner1 4/96 ST-153 929-B / ST-153 585 / Ref. ST-180 933-B / Ref. S-0698-B
Y Stop engine.
Y Do not run engine without air
cleaner or with dirty element.
Clean or replace element if dirty or
damaged. Replace element yearly
or after six cleanings.
1 Dust Cap
2 Baffle
3 Element
4 Plastic Fins
5 Housing
To clean air filter:
Wipe off cap and housing. Remove
cap and dump out dust. Wipe dust
from inside cap and housing with
damp cloth. Remove element and
reinstall cap.
Y Do not clean housing with air
hose.
Clean element with compressed air
only. Keep nozzle at least 1 in (25
mm) from inside of element. Max.
air pressure: 100 psi (690 kPa). Do
not remove plastic fins. Replace
element if it has holes or damaged
gaskets.
Reinstall element and cap (cap
arrows pointing up).
1235 4
Blow Inspect