Filter
Top Products
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 50
SPECIFICATIONS
Specifications
STRUCTURE.................................................................... Unitized, Welded Steel Plate
DRIVE REDUCTION SYSTEM ........................................ B50 Series Belt/Pulley/Spur Gear transmission.
MAXIMUM GRINDING WIDTH ........................................ 24 inches (610 mm)
OVERALL MACHINE WIDTH........................................... 27-1/2 inches (699 mm)
OVERALL MACHINE LENGTH........................................ 3 inches (1346 mm)
TYPICAL OPERATOR HANDLE HEIGHT ....................... 40 inches (1,066 mm)
VACUUM CLEANER CONNECTION DIAMETER ........... 1-1/2 inch (51 mm), 2-inch (51 mm) or 3-inch (76 mm)
GENERAL.
DFG/E BASIC WEIGHT.................................................... 250 lbs (114 kg)
DFG/G BASIC WEIGHT ................................................... 300 lbs (136 kg)
DFG/E ELECTRIC MOTOR, 2 hp, 3450 RPM, 16.8 amperes @ 115 VAC, 60 Hz, or 8.4 amperes @ 230 VAC, 60
Hz, switchable when the motor is not in operation. The electric motor requires a clean (no other electric products
on the same circuit) 20 ampere capacity circuit to properly function on 115 VAC, 60 Hz or 10 ampere capacity
circuit to properly function on 230 VAC, 60 Hz.
Honda GX340 engine 11 hp (82 kw) nominal, industrial quality, 4 cycle engine, 3450 RPM nominal maximum
governed speed.