Filter
Top Products
NOTICE TO OPERATORS
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV. #4 (05/28/09) PAGE 7
IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF THIS
MANUAL, PLEASE CONTACT THE FACTORY FOR PROPER ASSISTANCE BEFORE
ATTEMPTING TO OPERATE THIS PRODUCT.
SI TU NO PUEDES LE'ER O NO COMPRENDES EL CONTENIDO DE ESTE MANUAL
FAVOR DE PONERSE EN CONTACTO CON LA. FABRICA PARA ASSISTENCIA- A
PROPIA ANTES DE INTENTAR PARA OPERAR ESTE PRODUCTO.
SOLLTEN SIE DIESE GEBRAUCHSANWEISUNG NICHT LESEN KOENNEN ODER ES
NICHT VOLLKOMMEN VERSTEHEN, WENDEN SIE SICH BITTE AN DEN HERSTELLER
FUER RICHTIGE HILFE EHE SIE VERSUCHEN DIESES PRODUKT ZU OPERIEREN.
SI VOUS NE LISEZ OU NE COMPRENDRE ENTIEREMENT LES MATIERES DE CE
MANUEL, S'IL VOUS PLAIT, CONTACTEZ L'USINE POUR L'ASSISTANCE APPROPRIEE
AVANT D'UTILISER LE PRODUIT.
These safety alert symbols identify important safety messages in this manual. When you see these symbols, be
alert to the possibility of personal injury and carefully read the message that follows.
Do not allow anyone to operate the SURFACE GRINDER without first reading this Operator Manual and
becoming familiar with its operation. The manufacturer of the SURFACE GRINDER has gone to great extremes to
provide the owner(s) and/or operator(s) with the finest equipment available for its intended job function of
removing covering materials from concrete and wood floor surfaces. Yet, the possibility exists that the SURFACE
GRINDER can be utilized in and/or subjected to job applications not perceived and/or anticipated by the
ma
nufacturer. Such misuse and/or misapplication of the SURFACE GRINDER can lead to the possibility of
serious damage, injury or even death. It is the responsibility of the owner(s) and/or operator(s) to determine that
the SURFACE GRINDER is being utilized and/or operated within the scope of its intended job function. It is the
responsibility of the owner(s) and/or operator(s) to establish, monitor and constantly upgrade all safety programs
and/or practices utilized in and for the operation of the SURFACE GRINDER. The purpose of such programs is to
provide for owner(s') and/or operator(s') safety. Operators must be instructed to recognize and avoid unsafe
conditions associated with their work (29 CFR 1926.21 (b)(2)) and/or a pplicable updated revisions. It is the
responsibility of the owner(s) and/or operator(s) to determine that no modifications a
nd/or alterations have been
made to the SURFACE GRINDER. Modifications and/or alterations can lead to the possibility of serious damage,
injury or even death. It is the responsibility of the owner(s) and/or operator(s) to make this Operator Manual
available for consultation during all phases of operation. Refer to OSHA 2207 and/or applicable updated revisions
which contains all OSHA job safety and health rules and regulations (1926 and 1910) covering construction.
DANGER
CAUTION