Filter
Top Products
TRANSMISSION ASSY.
DFG-SERIES SURFACE GRINDERS OPERATION AND PARTS MANUAL REV #4 (05/28/09) PAGE 65
TRANSMISSION ASSY.
NO. PART NO. PART NAME QTY. REMARKS
1 29018-001 FRAME, MAIN 1
2 29018-002 COVER, TRANSMISSION 1
3 29018-003 BEARING, FLANGE 6
4 07029-006 WASHER, LOCK 3/8”, PLATED 24
5 07033-006 NUT, HEXAGON 3/8-16 UNC, PLATED 24
6 06500-006 SCREW, CAP 5/16-18 UNC X 3/4”, PLATED GDE. 5 12
7 07029-005 WASHER, LOCK 5/16” PLATED 12
8 29018-004 SHAFT 2
9 29018-005 RING, SNAP 2
10 29018-006 SPACER, LONG 3
11 10059-019 KEY, SQUARE ¼” X ¼” X 1-7/8” 2
12 29018-007 GEAR 2
13 07030-012 WASHER, FLAT ¾” PLATED 2
14 07038-012 NUT, HEXAGON JAM NYLOC ¾-16 UNF 2
15 29018-008 SHAFT 1
16 29018-009 SPACER, MEDIUM 1
17 29018-010 GEAR, DRIVE 1
18 29018-011 PIN, SPIRAL ROLL ¼” X 1-3/4” 1
19 29018-012 PULLEY, DRIVEN 1
20 29018-013 BUSHING, TAPERED 1
21 09499-006 SCREW, CAP ¼-20 UNC X ¾” PLATED GRADE 5 2
22 10057-011 KEY, SQUARE ¼” X ¼” X 1-1/4” 1
23 29018-014 V-BELT, B-50 2
24 29018-015 COVER, B-50 1
25 29018-016 BUMPER, RUBBER 1
26 29018-017 SCREW, CAP COUNTERSUNK ¼-20 UNC X 5/8” 9
27 29018-018 FASTENER, COVER 2
28 29018-019 PLUG, HOLE 4
29 29018-020 SPACER, SHORT 2
34 SFSG240330 MANIFOLD BLOCK .............................................................. 1 ..........S/N 25853 AND ABOVE
35 SF15043200 SCREW, CAP ¼-20 UNC X 4, PLATED, GRADE 5..............2 .......... S/N 25853 AND ABOVE
36 SP80590 GREASE FITTING, STRAIGHT, 1/8 NPT .............................6 ..........S/N 25853 AND ABOVE
37 SFSG120120 CONNECTOR, GREASE, 1/8” NPT......................................2 .......... S/N 25853 AND ABOVE
38 07033-004 NUT, HEX 1/4-20” UNC PLATED ......................................... 2 ..........S/N 25853 AND ABOVE
39 07029-004 WASHER, LOCK 1/4”, PLATED............................................2 .......... S/N 25853 AND ABOVE
40 SFSG120130 CONNECTOR, GREASE ......................................................6 ......... S/N 25853 AND ABOVE
41 SFSG240410 HOSE, GREASE LINE ..........................................................AR ....... S/N 25853 AND ABOVE
.............................................................................................. ............CUT TO LENGTH