Outback Power Systems VFX3024E Battery Charger User Manual


 
26
Once the MATE recognizes each FX (and OutBack Charge Controller), push and hold the  rst two soft
keys simultaneously to return to the MAIN menu. To program the FXs, go to the ADV/FX/STACK menu
on the MATE navigating with the following steps:
Press the <ADV> soft key.
NOTE: Pressing and holding the  rst two soft keys
at the same time will always bring up the Main
Menu screen.
Push any soft key on the ADV/SETTINGS/
WARNING screen and go to the ADV/PASSWORD
screen.
MAIN--------------------------
12:12:16A
SUM STATUS SETUP ADV
ADV/SETTINGS/WARNING
changes made could
adversely a ect
system performance
PROGRAMMING THE FXS
The screen displays 132. Press the <INC>
button until it scrolls to the password 141.
ADV/PASSWORD---------------
enter the password
132
ENTER INC DEC EXIT
ADV/PASSWORD----------------
enter the password
141
ENTER INC DEC EXIT
Push the <ENTER> soft key.