Filter
Top Products
30
ADV/FX/STACK----------P02
stack OB Slave L1
phase
DOWN INC DEC PORT
OUTBACK OB SLAVE L2
• Set the FXs you want as series slaves (Leg 2) to OB Slave L2.
• This FX is considered the L2 phase.
To use OutBack Slave L2 Stacking, press the
<INC> soft key in the ADV/FX/STACK OB screen
to change the stack phase from OB Slave L1 to OB
Slave L2.
ADV/FX/STACK----------P02
stack OB Slave L1
phase
DOWN INC DEC PORT
ADV/FX/STACK----------P02
stack OB Slave L2
phase
DOWN INC DEC PORT
The FX assigned to Port 02 now has OB Slave L2
status.
ADV/FX/STACK-----------P01
stack 1-2 ph Master
phase
DOWN INC DEC PORT
A 3-phase system with only three FXs requires
one of two di erent stacking procedures. Starting
from the rst stacking menu—ADV/FX/STACK—
press the <INC> soft key four times.
Press four times
3PHASE 3PH MASTER
OB Slave 1 stacking phase