Filter
Top Products
Operator Manual, Supercharger 60 R3.0
Page 19 of 62
4.8 SW4 - CELL SELECTOR:
4.8.1. Two digit selector to program the battery terminal voltage as a function of the
number of cells.
4.8.2. Rate: 1.75 volts per cell for charge and 1.0 volts per cell for discharge.
4.8.3. Used also in the Float and Peak Voltage modes to enter nominal battery voltage.
4.9 SW5 - DIGITAL VOLTMETER INPUT SELECTOR:
4.9.1. External, 2/20/200V scale.
4.9.2. Internal, 20/200V scale.
4.10 SW6 - VOLTAGE MODE SELECTOR:
4.10.1. Four position switch to select Normal, Float and Peak Voltage modes.
4.11 SW7 - TIMER SPEED SELECTOR:
4.11.1. Three position switch to select
4.11.1.1. Normal (HH:MM)
4.11.1.2. FAST (MM:SS)
4.11.1.3. TEST (SS:S/60).