Filter
Top Products
17
Fig. 12
RELEASE
LEVER
ASSEMBLY
Fig. 13
Fig. 14
Fig. 15
TO CLOSE THE LEG STAND AND MOVE THE
SAW
See Figures 12 - 15.
Remove any workpieces from the tool.
Remove and securely store any tools or accessories such
as rip fence, miter gauge, clamps, blade guard, etc.
Lower the saw blade.
To close the leg stand:
At the same time, step on the release lever, grasp the
grips, and lift the handles up and away from the body.
Push the table saw until the release lever clicks and locks
into place.
To move the leg stand:
Holding the grips firmly, pull the handles toward you until
the leg stand and saw are balanced on the wheels.
Push the saw to the desired location then either open
the leg stand for saw operation or store the saw in a dry
environment.