Filter
Top Products
-20-
Df[\cN(/).=fiDXZ_`e\jD]^%J`eZ\*&()
FG<I8K@FEJ
The cutter height is adjusted with the height handwheel.
To gauge the cutter height in relation to the table, use
the height scale or a precision ruler with fine graduations.
An alternative method would be to place a sample of the
shaped cut next to the cutter.
KfZ_Xe^\k_\Zlkk\i_\`^_k#[fk_\j\jk\gj1
(% DISCONNECT SHAPER FROM POWER!
)% Loosen the spindle lock on the left side of the
cabinet (see =`^li\)().
*% Rotate the spindle height handwheel to bring the
cutter to the required height, then re-tighten the
lock (see =`^li\))).
:lkk\i?\`^_k
=`^li\)(% Spindle lock on the left side of
the cabinet.
=`^li\))% Spindle height scale and
handwheel.
Height
Scale
Spindle Height
Handwheel