Filter
Top Products
-24-
For Machines Mfg. Since 8/09
Model SB1029
OPERATION
Removing & Installing
Grinding Wheels
If installing a grinding wheel for the first time,
or when replacing a worn wheel, this section
explains the order in which this process must
take place. Every time a grinding wheel is
removed from its hub, this procedure must be
repeated. If installing a new wheel right out of
the box, the ring (
Page 23) test must also still
be completed.
Figure 23. Removing wheel retaining nut.
4. Using the wrenches, loosen the retaining nut
in the direction shown in Figure 23.
!
5. Unthread the retaining nut (see Figure 24).
!
Figure 24. Exposing wheel retaining washer.
Figure 25. Wheel ready for removal.
6. Remove the retaining washer shown in
Figure 25.
!
Hold
To remove and install a grinding wheel:
1. DISCONNECT MACHINE FROM POWER!
2. Place a sheet of plywood or similar on top
of the table (see Figure 21), and open the
grinding wheel cover.
Figure 21. Protecting table.
3. Position the spindle wrenches on the spindle
lug and the retaining nut (see Figure 22).
Figure 22. Wheel retaining nut.
Spindle
Lug
Retaining
Nut
Plywood