Filter
Top Products
Administration
Administration View
Strata CTX Attendant Console 09/02 45
The Admin Tab contains the following sections:
Notes
• The Administrator can change all the above settings.
• The Operator/Attendant can change only PC level settings.
FIELD DESCRIPTION
Multiple Attendant
Allow multiple Attendant operations. (Single Attendant
doesn’t allow set Position Busy).
BLF Refresh Rate
Enables the Attendant to define the refresh rate for
polling the CTX for BLF/DSS status. The minimum rate
is 1 second. The default is 3.
Automatic Dialing Enable/Disable automatic dialing.
Automatic Hold Enable/Disable automatic hold.
Activate Incoming Call Enable/Disable activate incoming call.
Default Transfer Enable/Disable default transfer (Blind transfer).
Anticipate DTMF Tone with
Flash
Enable/Disable the DTMF Tone dialog to anticipate use
after Flash.
Continuous DTMF Enable/Disable the continuos DTMF tone.
Max. Caller ID
Maximum of Caller ID. Allow the Caller ID telephone
numbers to display in the Caller ID list. The valid value
is from 0 to 20.
Max. Called Number
Maximum of Called Number. Allow the numbers of
Called Numbers display on the Called List. The valid
value is from 0 to 10.