Filter
Top Products
15
Routing Without Security
Guard and/or Fence
Using the router without the
security guards and fence in
place can lead to serious personal injury. Use
extreme caution: operate the router without
security guards and fence ONLY when
absolutely necessary, and with piloted type
router bits.
Feed workpiece against the
router bit’s direction of rotation.
Unplug router prior to changing the bit, modify-
ing settings, or making any other adjustments.
For many jobs you must remove the fence
from the router table.
Use only piloted router bits.
Inside Routing
1. Place your workpiece on the table relative
to the router bit as shown in Figure 21.
2. Feed your workpiece through the bit in the
direction of the arrow. Always feed against
the router bit’s direction of rotation.
Figure 21
Outside Routing
1. Place your workpiece on the table relative
to the router bit as shown in Figure 22.
2. Feed your workpiece through the bit in the
direction of the arrow. Always feed against
the router bit’s direction of rotation.
WOLF113-37
PULL ON
PUSH OFF
RESET
O
U
T
L
E
T
S
WARNING
WARNING
Figure 22
Routing Irregular Shaped Workpieces
Use starting pin (see Figure 23). Use only
piloted router bits.
1. With fence removed, take pin from storage
hole and thread into mounting hole.
2. Turn on router and slowly advance the
workpiece in the direction of the bit until it
touches the pilot and the bit begins to cut
wood. Feed workpiece against the rotation
of the bit. (See Figure 23.)
Figure 23
3. Drawing the workpiece away from the
starting pin, feed it through the bit, at the
same time pressing it against the pilot
until the cut is complete.
4. Slowly advance the workpiece toward the
starting pin until the workpiece contacts it.
STARTING PIN IN
MOUNTING HOLE
WOLF113-39
WOLF113-38
PULL ON
PUSH OFF
RESET