Note
If you scan without preview, colors are adjusted based on the document type selected in Select
Source.
When Film is Previewed
The thumbnail appears in the Preview area.
Select the checkbox to scan the frame.
Important
Film cannot be scanned without previewing.
If a message for calibration appears, remove the film, then place the Film Adapter Unit over the
first frame of the Film Guide and click OK.
When the calibration is completed, follow the on-screen instructions to load the film into the
Film Guide, then click OK.
Note
When the whole film image is displayed, click
(Whole Film Image) to switch to thumbnail
view.
To preview another frame, place the Film Adapter Unit over the frame you want to scan, then
click Preview.
4.
Set Destination.
Page 169 of 308 pagesScanning in Basic Mode
