5.
Click Scan.
Preview scan starts.
When preview scan of the film is completed, the preview image appears.
Important
If a message for calibration appears, remove the film, then place the Film Adapter Unit over the
first frame of the Film Guide and click OK.
When the calibration is completed, follow the on-screen instructions to load the film into the
Film Guide, then click OK.
Note
Preview image does not appear when the Preview before scanning checkbox is not selected in
the Scan Settings dialog box. The scanned images appear directly in the Thumbnail window.
If film cannot be scanned correctly, see "
Problems with Scanning Film
" in "Troubleshooting."
6.
Select the checkbox of the frame and click Scan.
When scanning is completed, the Scan Complete dialog box opens. Select Scan or Exit. To scan
another frame, place the Film Adapter Unit over the frame you want to scan, then select Scan. Select
Exit to end.
The scanned images appear in the Thumbnail window.
Page 33 of 308 pagesScanning Film
