On-screen Manual
>
Scanning Guide
>
ScanGear (Scanner Driver) Screens
> Scanner Tab
Scanner Tab
On the Scanner tab, you can specify the following settings.
Select Folder Where Temporary Files are Saved
Specify a folder in which to save images temporarily. To change the folder, click Browse... to specify
another one.
Sound Settings
You can set the machine to play music during/at the end of a scan.
Select the Play Music During Scanning or Play Sound When Scanning is Completed checkbox, then
click Browse... and specify a sound file.
You can specify the following files.
- MIDI file (*.mid, *.rmi, *.midi)
- Audio file (*.wav, *.aif, *.aiff)
- MP3 file (*.mp3)
Calibration Settings
Platen Calibration/Film Calibration
Click OK to start the calibration. The scanner will be calibrated to reproduce correct color tones in
scanned images.
Perform calibration when the color tone of the preview image is significantly different from the
source document, or when colors appear in white portions.
Note
When performing Film Calibration, remove the film, then place the Film Adapter Unit over the
first frame of the Film Guide and click OK.
Note
Calibration may take time depending on your computer.
Test Scanner...
The Scanner Diagnostics dialog box opens and you can start the scanning test.
Click Start to start scanner diagnostics.
Page top
Page 227 of 308 pagesScanner Tab
