A SERVICE OF

logo

4.
Click the corresponding icon.
Custom Scan with One-click Tab
One-click Mode Screen
5.
Select Document Type according to the document to be scanned.
6.
Set the document size and scanning resolution as required.
7.
Start scanning.
Scanning starts.
Important
A
message for calibration may appear when scanning film. In that case, remove the film, then
place the Film Adapter Unit over the first frame of the Film Guide and click OK.
When the calibration is completed, follow the on-screen instructions to load the film into the
Film Guide, then click OK.
Page top
Page 44 of 308 pagesEasy Scanning with One-click