A SERVICE OF

logo

On-screen Manual
>
Scanning Guide
>
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
>
A
djusting Brightness and Contrast
Adjusting Brightness and Contrast
In ScanGear's Advanced Mode tab, click
(Brightness/Contrast).
Note
Click
to switch to detailed view. Click to return to the previous view.
Click Defaults to reset all adjustments in the current window.
Channel
Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation). These
colors can be adjusted individually as a "channel."
Master
A
djust the Red, Green and Blue combined.
Red
A
djust the Red channel.
Green
A
djust the Green channel.
Blue
A
djust the Blue channel.
Note
Only Grayscale will be displayed in Channel when Color Mode is Grayscale or Grayscale(16bit).
Page 189 of 308 pagesAdjusting Brightness and Contrast