9.3 Auto Transmit Key Presses Off
Syntax
Hexadecimal 0xFE 0x4F
Decimal 254 79
ASCII 254 “O”
Description In this mode, up to 10 key presses are buffered until the unit is polled
by the host system, via the poll keypad command 254 38. Issuing this
command places the unit in polled mode.
Remembered Yes
9.4 Poll Key Press
Syntax
Hexadecimal 0xFE 0x26
Decimal 254 38
ASCII 254 “&”
Description This command returns any buffered key presses via the RS-232 inter-
face. The host system must be set up to receive key codes. When the
display receives this command, it will immediately return any buffered
key presses which may have not been read already. If there is more than
one key press buffered, then the high order bit (MSB) of the returned key
code will be set (1). If this is the only buffered key press, then the MSB
will be cleared (0). If there are no buffered key presses, then the returned
code will be 0x00. Please note that to make use of this command, the
“Auto Transmit Key Presses” mode should be off.
Remembered No
9.5 Clear Key Buffer
Syntax
Hexadecimal 0xFE 0x45
Decimal 254 69
ASCII 254 “E”
Matrix Orbital GLK24064-25 36
