Transmitting Documents
5-6 WorkCentre Pro 555/575
Direct Send
When the Direct Send default transmission mode is selected, the
machine first dials the remote fax machine and confirms the
connection. When the connection is confirmed the machine sends
each document page as it is scanned.
To send a single transmission in Direct Send Mode, refer to the
“Direct Send with Memory Send Selected” procedure that follows.
To send a document using the Direct Send mode as the default
transmission mode:
1. Load the document face down in the Document Support.
2. Select the desired
Resolution
and
Contrast
.
3. Using one of the dialing methods, dial the fax number and press
Start
, if necessary. (See Chapter 4, “Dialing Methods”.)
The machine assigns, dials the number and scans the pages as they
are transmitted.
Note: You may select another option for this job. Refer to the
selected option for the procedure.
Jan-31 02:23pm 100%
Auto answer
Dialing
5551212
Communicating P001
5551212
Sending P001
5551212
