Polling
WorkCentre Pro 555/575 7-11
Continuous Polling*
Use this procedure to poll the same machine or group of machines
frequently, you can set up your machine to automatically perform this
task on a regular schedule. When the Continuous Polling feature is
active, your machine polls and receives documents from the
designated machines, at the same time, on each day you have
selected.
Only one Continuous Polling operation can be reserved at a time. To
delete the reserved Continuous Poll operation refer to “Deleting
Continuous Poll Jobs”.
To set the Continuous Polling feature:
1. Press:
2. Enter the polling interval, then press
Enter
.
* Not available in all markets.
Note: The interval is the period of time between polling
procedures. Possible settings are 10 to 70 minutes, in 10
minute increments.
Menu
Interval (min)
(10-70) [ 0
]
Start stop time
[08:00am-05:00pm]
