A SERVICE OF

logo

Programming the Machine
2-18 WorkCentre Pro 555/575
22. To add an additional option, go to step 8. To exit, press and
go to step 23 to complete the procedure.
23. To link this Speed Dial Number to a One Touch key, press the
desired
One Touch Key;
or to skip this step, press
Enter
.
24. To assign additional Speed Dial numbers, repeat steps 2-23.
25. When you have completed the Speed Dial assignment, press
Exit
or
Stop
to return to the Standby Mode.
Note: If you select an assigned One Touch number, you have the
option of deleting or retaining the information previously
stored.
Press One Touch
or ENTER