Mailbox Communications
WorkCentre Pro 555/575 8-19
4. Enter the remote sub address and press
Enter.
5. To enter a password, press to select PWD. Using the
numeric keypad, enter the remote password, if required by the
remote machine, and press
Enter
.
6. To exit the menu, press to select Done.
7. Using one of the dialing methods, enter the remote phone
telephone number and press
Enter
.
8. Press
Start
.
9. If a security code is required, press . Then enter the security
code obtained from the remote operator, then press
Enter
.
If no security code is required by the sending machine, press
Note: The sub address entered in this procedure overrides a sub
address programmed in a One Touch or Speed dial
number.
Load document
To poll press START
2.No
Add security code
1.Yes
