A SERVICE OF

logo

Programming the Machine
2-54 WorkCentre Pro 555/575
Line Monitor Default Setting
Enable this feature to listen to the initial call sequence during all send
and polling operations. To enable this feature for a single operation,
refer to “Listen to Dial in chapter 5".
To set the Line Monitor feature:
1. Press:
2. Select the Line Monitor option:
To enable the Line Monitor feature, press .
To disable the Line Monitor feature, press .
3. The menu selection screen redisplays. Press
Exit
or
Stop
to
return to the Standby Mode.
Menu
1.Alway
Line monitor
2.Off