Filter
Top Products
23 CHAPTER 7: UPGRADE PROCEDURES
4 Select Install WLAN Applications.
5 Follow the instructions on the screen.
Upgrade the firmware.
1 With the Installation CD or diskette still inserted into the PC, select Start >
Programs > 3Com AirConnect > AirConnect Firmware Upgrade Utility.
2 Make sure that the AirConnect wireless PC Card is inserted in the PC.
3 Click the button to the right of the field labeled Firmware Filename, then go to the
Firmware > MU directory on the Installation CD or diskette.
4 In the Firmware\MU directory, select the upgrade file: 3compc.img
5 Click Update to begin the upgrade.
6 When prompted, reboot the system.
Windows Me,
Windows 98, and
Windows 98SE
Wireless Client
Upgrade Procedure
Remove the old driver.
1 Under Device Manager, select Network Adapters.
2 Under Network Adapters, select the AirConnect card.
3 Select Remove.
4 When prompted, select Yes to reboot the PC.
Install the new driver.
1 Insert the Installation CD or 3.5" diskette into the PC.
2 Follow the instructions displayed on the screen.
3 When prompted, enter the WLAN Service Area ID.
4 Remove the Installation CD or 3.5" diskette, insert the Windows 98 installation
diskette into the PC.
5 Click OK when prompted. The PC will search for required operating system files on
the installation diskette.
6 When prompted, reboot the PC.
Upgrade the 3Com Launcher.
1 Be sure that the Installation CD or 3.5" diskette is inserted in the PC.
2 Go to Start > Run.
3 Enter <drive>\setup.exe, then click OK.
4 Select Installation for Windows.
5 Select Install WLAN Applications.
6 Follow the instructions on the screen.