Filter
Top Products
3
C
HAPTER
1: B
EFORE
Y
OU
B
EGIN
Disk Factory
If you are installing the software on a computer that does not have a CD-ROM
drive, or if you choose to install the drivers manually, you will have to make
diskettes from the
Installation CD
. The setup application includes Disk Factory, a
utility for creating disks from CD. To use disk factory, you need access to a
computer with a CD-ROM drive and a floppy drive.
1
For a transfer of the driver software to a diskette, prepare a diskette labeled
Drivers.
For a transfer of the application software to diskette, prepare three disks labeled
as follows:
AirConnect Application Disk 1
AirConnect Application Disk 2
AirConnect Application Disk 3
2 Put the Installation CD in the CD-ROM drive. The SETUP program should start
automatically. If it does not start, you can run it manually by selecting Run from
the Start menu.
3 Select Create Diskettes.
4 In the Disk Factory window, click Next.
5 Select the software you want to transfer to diskette. If you select All, you will need
four floppy diskettes.
6 Select the action, for example, Create and Verify Disks, and click Next.
7 When you are ready to install the application software from diskette, put
AirConnect Application Disk 1 in the floppy drive and run SETUP.
If you are installing the drivers manually, use the Drivers diskette when the setup
wizard for your operating system prompts for drivers supplied by the
manufacturer.