Filter
Top Products
Windows NT 4.0 Workstation/Server Wireless Client Upgrade Procedure 24
Upgrade the firmware.
1 With the Installation CD or diskette still inserted into the PC, select Start >
Programs > 3Com AirConnect > AirConnect Firmware Upgrade Utility.
2 Make sure that the AirConnect PC Card is inserted in the PC.
3 Click the button to the right of the field labeled Firmware Filename, then go to the
Firmware > MU directory on the Installation CD or diskette.
4 In the Firmware\MU directory, select the upgrade file: 3compc.img
5 Click Update to begin the upgrade.
6 When prompted, reboot the system.
Windows NT 4.0
Workstation/Server
Wireless Client
Upgrade Procedure
Remove the old driver.
1 Log on as Administrator.
2 In the Control Panel, select Network.
3 In the Network window, select the Adapters tab.
4 Select the AirConnect card, then select Remove.
5 Close the Network window.
6 Reboot the system.
Install the new driver.
1 In the Control Panel, select Network.
2 In the Network window, click the Adapters tab.
3 In the Adapters window, select Add.
4 Click the Have Disk button.
5 Insert the Installation CD or 3.5" diskette into the PC.
6 Type the drive letter in the entry field, then click OK.
7 When prompted, select the AirConnect PC Card entry.
8 When prompted, enter the WLAN Service Area ID.
9 To leave the Network window, click Close.
10 If TCP/IP is installed, you may be prompted to enter additional information
appropriate to your network.
Upgrade the 3Com Launcher.
1 Insert the Installation CD or 3.5" diskette.
2 If the CD or diskette does not Autorun, go to Start > Run, enter
<drive>:\setup.exe, then click OK.
3 Select Installation for Windows.
4 Select Install WLAN Applications.
5 Follow the instructions on the screen.