Filter
Top Products
6 © 3M 2011. All rights reserved.
Step 2 – Install memory-card drive (new drive only)
Before you begin
The procedures that follow are only for users with new memory-
card drives. If you are already using a drive delivered with a
previous version of Data Manager, installing the new drive is not
required.
Please read the manufacturer’s instructions before installing or
using the new memory-card drive.
If you have problems
If these installation procedures do not work on your computer,
call 3M Service (see the last page in this guide).
Step 2.1 - Install the new memory-card drive
With the computer running, plug the memory-card drive USB
cable into an available USB port. Windows XP, Vista or Windows
7 will discover the new drive and install the appropriate driver.