Filter
Top Products
Installation and setup overview
The steps required to install Data Manager 3.xx software will vary depending upon the
installation type. See the descriptions below for an overview of installation procedures.
Data Manager installation and setup should be performed by
someone having in-depth knowledge of the library’s circulation
system.
Installing Data Manager for the first time
You must complete all the setup steps listed below before you can use Data
Manager software. Once you complete the initial setup, day-to-day operations are
relatively simple and straightforward.
Procedure Page Number
Step 1 – Install Data Manager and DLA software
.........................................3
Step 2 – Install memory-card drive
................................................................6
Step 3 – Determine import/export format
......................................................9
Step 4 – Create list folders
...........................................................................10
Step 5 – Define list barcode validation parameters
...................................13
Step 6 – Set export parameters
....................................................................14
Step 7 – Test your export formats
...............................................................18
Step 8 – Set import parameters
............................................................22
Upgrading Data Manager
If an older version of Data Manager software (v2.0 or higher) is installed on
your computer, installing version 3.2 (or higher) will remove the older version
and migrate your settings and formats to the new version.
Procedure Page Number
Step 1 – Install Data Manager and DLA software
.........................................3
2 © 3M 2011. All rights reserved.