Agilent Technologies 660MHz Welding System User Manual


 
33
Programming Reference
Agilent 81130A SCPI Command Summary
:SYSTem
:ERRor?
Read error queue
84
:KEY
Numeric Simulate key press or read last key pressed
84
:PRESet
no function
87
:SECurity
87
[:STATe]
ON|OFF Switch security on and off
:SET
Block data Set/read complete instrument setting
88
:VERSion?
Read SCPI compliance setting
88
:WARNing
88
[:COUNt]?
Read number of active warnings
:STRing?
Read active warnings as concatenated string
89
:BUFFer?
Read maximum possible length of
concatenated string
89
:TRIGger
(Pulse mode and period source)
[:SEQuence [1]] | :STARt]
:COUNt
<value> Set/read number of triggered periods to be
generated per ARM event (BURST period)
89
:PULSes[1|2]
<value> Set/red the number of pulses within the trig-
gered periods at OUTput 1 or OUTput 2
92
:LEVel
:TERMination
<value> Set/read termination voltage level at CLK IN
92
:SOURce
IMM | INT[1] | EXT2 Set/read trigger source (Immediate | PLL |
CLK IN)
93
Command Parameter Description see page