Agilent Technologies 660MHz Welding System User Manual


 
74
Programming Reference
SCPI Instrument Command List
Command
:PULS:TRIG[1]:MODE
Long
[:SOURce]:PULSe:TRIGger[1]:MODE
Form
Set & Query
Parameter
CONTinuous | STARt
*RST value
STARt
Description
Use this command to set/read the TRIGGER OUT generation mode in
pattern mode.
Command
:PULS:TRIG[1]:POS
Long
[:SOURce]:PULSe:TRIGger[1]:POSition
Form
Set & Query
Parameter
1 | 2 | 3 | 4
*RST value
1
Description
Use this command to set/read the TRIGGER OUT position in pattern
mode. The specified value selects a segment number for the
Agilent 81130A.
Command
:PULS:TRIG[1]:VOLT
Long
[:SOURce]:PULSe:TRIGger[1]:VOLTage[:LEVel][:IMMediate]
Form
Set & Query
Parameter
TTL | PECL | SYM | ECLGND | ECLN2V
*RST value
TTL