Filter
Top Products
73
Programming Reference
SCPI Instrument Command List
Parameter suffix
S
with engineering prefixes
*RST value
0.8 ns
Specified limits
Agilent 81131A: 0.8 ns or 1.6 ns
Parameter
coupling
Trailing-edge = Leading-edge fixed coupled
Description
Use this command to set/read the transition-time of the pulse leading-
edge. Note that the leading and trailing edges of the pulse have to fit
within the defined pulse-width.
Example
:PULS:TRAN1 1.6NS
Set OUTPUT 1 leading edge to 1.6 ns
NOTE
Selectable transition time is only available with Agilent 81131A.
Command
:PULS:TRAN[1|2]:TRA
Long
[:SOURce]:PULSe:TRANsition[1|2]:TRAiling
Form
Set & Query
Parameter
Numeric
Parameter suffix
S
with engineering prefixes.
*RST value
0.8 ns
Specified limits
Agilent 81131A: 0.8 ns or 1.6 ns
Parameter
coupling
Trailing-edge = Leading-edge fixed coupled
Description
Use this command to set/read the transition-time of the pulse trailing-
edge. Note that the leading and trailing edges of the pulse have to fit
within the defined pulse-width.
NOTE
Selectable transition time is only available with Agilent 81131A.